Abstract
AbstractThe aim of this study is to validate and optimize a new concept of implementing an aspirator as the vacuum generator for a vacuum membrane distillation (VMD) setup. Numerical models are developed for the aspirator, and its interconnectivity with the VMD chamber is demonstrated. A correlation to estimate the minimum aspirator pump size for a given permeate mass flow is deduced from these models. The dependence of the system’s specific power consumption (per unit permeate flow) on the feed flow rate, number of membrane sheets in the VMD module, and vacuum pressure is investigated. The gained output ratio (GOR) of the proposed system is comparable (GOR ≈ 0.8) to conventional single-stage VMD with a vacuum pump, if brine heat is recovered using a regenerator to preheat the incoming feed. The theoretical power requirement for a vacuum pump is lower than that used by the aspirator system, if all vapor is condensed and only non-condensable gasses are removed by the vacuum pump. At lower vapor pressures, ...
Sign-in/Register to access full text options 
Free) 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call
