Abstract

In this study, the effect of microbead dosages (0%, 5%, 10%, 15%, and 20%) on the carbonation resistance of expanded polystyrene (EPS) concrete was investigated. Five groups of EPS concrete specimens were produced and underwent rapid carbonation testing. The carbonation depth and strength after carbonation of the specimens were measured at different carbonation ages (7 days, 14 days, and 28 days) and analyzed to determine the effect of microbead dosages and compressive strength on carbonation resistance. Results indicated that the carbonation depth increased with the progression of carbonation time. The introduction of microbeads was found to significantly improve the carbonation resistance of EPS concrete, leading to a reduction in carbonation depth of over 50% after 28 days and an increase in strength after carbonation by 18–56%. A relative compressive strength model for EPS concrete after carbonation was developed, which could accurately characterize the growth of compressive strength. Based on the analysis of EPS concrete carbonation depth data, a prediction model for the carbonation depth of EPS concrete with microbead dosage was established through fitting, providing improved accuracy in predicting carbonation resistance. The microstructure of EPS concrete was also examined using scanning electron microscopy to uncover the underlying mechanisms of microbead enhancement on carbonation resistance. These findings have potential implications for future research and engineering applications in the carbonation resistance of EPS concrete.

Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.