Abstract
AbstractA new type of fractal‐shaped microstrip patch antenna for ultra‐wideband (UWB) applications and with sufficient rejection in the WLAN band is presented. The radiating patch is placed on a 1.6 mm thick low‐cost FR‐4 epoxy substrate and is fed using a symmetric coplanar waveguide. The size of the proposed antenna in terms of wavelength is 0.189λ0 × 0.197λ0. A sectorial‐circular slot in the patch is used to create WLAN band notch. An impedance bandwidth of 11.76 GHz (from 2.19 to 13.95 GHz) is achieved, along with achieving WLAN band rejection from 4.67 to 6.21 GHz. Nearly omnidirectional radiation pattern with the maximum gain of 5 dB in the passband is achieved. In the rejection band, the gain drops to −3 dB. The simulated results are verified against experimental data and a good agreement between the two sets of data is seen. The proposed antenna covers both the unlicensed 2.4 GHz band and the UWB.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.