Abstract
This paper presents the first silicon-flow sensor based on lift force. The sensor is a bulk-micromachined airfoil structure that uses the lift force as a sensing principle. The lift force acts normal to the flow in contrast to drag-force sensor types, where the force acts in the flow direction. The sensor utilizes the special distribution of the lift force along the length of the sensor structure. Since the sensor, like an airfoil, is mounted at a small angle to the flow, it induces very little flow disturbance. The sensor consists of two plates connected to a center beam. Each plate is 5/spl times/5-mm square with a thickness of 30 /spl mu/m. The flow-induced forces deflect the two plates in the same direction, but with different magnitude. The deflections are detected by polysilicon strain gauges. The differential mode bridge makes the sensor insensitive to common mode deflection, e.g., acceleration forces. The lift-force principle is characterized using fundamental airfoil theory. The sensor has been experimentally verified, and a flow sensitivity of 7.4 /spl mu/V/V/(m/s)/sup 2/ has been measured in both flow directions.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have