Abstract
The noise figure of an RF CMOS mixer is strongly affected by flicker noise. The noise figure can be improved using pMOS switch circuits, which insert current at the on/off crossing instants of the local oscillator switch stage because the circuits reduce the flicker noise injection. When it is applied to a conventional Gilbert mixer, the injection efficiency and linearity are degraded by the nonlinear parasitic capacitances of the pMOS switch circuits and the leakage through the parasitic path. We propose the pMOS switch circuits with an inductor, which tunes out the parasitic components at 2fo and closes out the leakage path. The mixer fabricated in 0.13-mum CMOS at 2.4-GHz center frequency has provided improved characteristics for linearity and noise figure.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: IEEE Transactions on Microwave Theory and Techniques
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
