A NEW PRINCIPLE OF PELLET FEEDER DESIGN1

Abstract

Most current commercial devices dispense dry food pellets by moving the pellets horizontally toward a discharge point. Individual pellets, captured by perforations in a horizontal metal disk, are discharged one by one by stepwise rotation of the disk within the pellet reservoir. In our laboratory, where the average pellet discharge rate is some 20,000 pellets per week, feeders of this type produced occasional problems. Some were electronic; others involved failure always to capture a pellet in each perforation, particularly when the pellet supply was low. But the most common problem was an accumulation of pellet chips and dust under and around the perforated disk, which ultimately jammed the mechanism. Despite weekly cleaning and maintenance, troubles arose at least twice a month, prompting a search for a simpler pellet‐feeder design which would be more reliable and require less maintenance. The present pellet feeder employs a vertical rather than horizontal design principle. It has been used extensively in operant conditioning applications for more than a year. More than 200,000 pellets have been reliably discharged from a single feeder without a breakdown. No maintenance, other than a weekly cleaning of the discharge tube, has been required.