Abstract

In this paper a new method for measuring phase noise of microwave oscillators based on delay line frequency discriminator is proposed. Elimination of phase shifter is the major advantage of this technique over the traditional delay line technique. By using this new technique, manual or electronic tuning of phase shifter to reach phase quadrature at the phase detector input ports is not needed anymore. A 90-degree hybrid is used in this technique and another path including a phase detector and LNA is added. Finally by using a dual channel FFT analyzer and performing some processing over the sampled data of the two channels, the phase noise of the oscillator will be extracted. A setup based on the proposed method was constructed and the phase noise of a 3 GHz phase locked oscillator was measured via three methods; the traditional delay line method, the phase shifter-less method and direct spectrum reading from spectrum analyzer. Comparison of the measured data of the three methods shows the validity of the proposed method.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.