Abstract
Many advanced oxidation processes involve addition of hydrogen peroxide (H(2)O(2)) with the aim of generating hydroxyl radicals to oxidize organic contaminants in water. However, chemical oxygen demand, a common measure of gross residual organic contamination, is subject to interference from residual H(2)O(2) in the treated water. A new method, involving catalytic decomposition of H(2)O(2) with addition of heat and sodium carbonate (Na(2)CO(3)), is proposed in this work to address this problem. The method is demonstrated experimentally, and modeled kinetically. Results for 5 mM H(2)O(2) in deionized (DI) water included reduction to below the COD detection limit after 60 min heating (90(◦)C) with addition of 20 g/L Na(2)CO(3) concentrated solution, whereas 900 min were required in treated municipal wastewater. An approximate second order rate constant of 11.331 M(-1)·min(-1) at Na(2)CO(3) dosage of 20 g/L was found for the tested wastewater. However, kinetic modeling indicated a two-step reaction mechanism, with formation of peroxocarbonate (CO(4)(2-)) and ultimate decomposition to H(2)O and O(2) in pure H(2)O(2) solution. A similar mechanism is apparent in wastewater at high catalyst concentrations, whereas at low Na(2)CO(3) addition rates, the catalytic effects of other constituents appear important.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
