A new method for rapid preparing high-strength saturated clay samples in large-scale model tests

Abstract

The preparation of high-strength saturated clay samples for large-scale model tests presents a significant challenge in geotechnical engineering. The slurry consolidation method has been conventionally employed to prepare saturated clay, despite its time-consuming and labor-intensive nature. Therefore, this study proposes a rapid preparation technique for clayey soils utilizing the dynamic compaction method, enabling the facile preparation of saturated clay samples by compacting the soils from an unsaturated state. During compaction, the void ratio decreases, thereby increasing the degree of saturation and enhancing the soil strength. Critical to this method are two variables: the moisture water content and the soil density, which are determined through bench-scale compaction tests using the Proctor compaction test apparatus. These tests establish the relationships between moisture content and density, degree of saturation, and soil strength. The moisture content aligning with the target soil strength is selected as the target moisture content for model-scale soil preparation, whereas the moisture content-density relationship sets the target density value. The laboratory tests validate that the soil strength of the saturated model-size clay samples prepared using the proposed method fulfills the requisite criteria, indicating its effectiveness for rapid preparation of high-strength saturated clay samples in large-scale model tests.