Abstract
This paper presents a new mechanism controlling the acceleration of fatigue crack growth of a hydrogen-charged high-strength steel (bearing steel SAE52100, σ ult > 1, 900MPa, HV = 569). Three- dimensionally complicated shape of a primary crack and secondary cracks were observed in hydrogen- charged specimens. Marked acceleration of fatigue crack growth in the presence of hydrogen was observed particularly at low test frequency, and was attributed to the initiation and successive coalescence of secondary cracks formed ahead of primary crack. These secondary cracks were produced along prior-austenite grain boundaries and carbide boundaries, or by direct cracking of carbides. Surprisingly, secondary cracks were observed outside the ordinary plastic zone ahead of the crack tip. TEM observation elucidated that the secondary cracks outside the crack tip plastic zone were produced by hydrogen-induced deformation twins impinging on grain boundaries and carbides. These results suggest a new mechanism of the acceleration of fatigue crack growth rates in high-strength steels caused by hydrogen-induced deformation twins, rather than due to hydrogen- enhanced localized plasticity. The phenomena associated with time dependent fatigue crack growth are presumed to be correlated with the initiation and coalescence of secondary cracks in the presence of hydrogen.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
