Abstract
To meet water reuse and discharge requirements in Davis Station, Antarctica, an advanced water treatment plant (AWTP) had been designed and tested for nine months. The key design factors for operating in small communities in remote areas included low maintenance requirement (low chemical inventory, minimal onsite labour), high LRVs for pathogens, robust operation, and high automation. Based on these requirements, the seven-barrier AWTP included ozonation, ceramic microfiltration, biological activated carbon, reverse osmosis, ultraviolet radiation, calcite filtration and chlorination. The nine month test demonstrated that the plant was able to provide minimum LRVs of 12.5 for virus and bacteria, and 10 for protozoa. The overall estimated chemical consumption was lower than equivalent continuous operations elsewhere due to a reduced number of Clean in Place (CIP) cycles as compared to industry. This was achieved by optimised integration of the barriers. Furthermore, there was no functional failure of major barriers and the automated online pressure decay test (PDT) validations for MF and RO were successful. Although some minor improvements, such as a reduced frequency of RO pre-filter cartridge replacement, are still needed, the new integrated plant has fulfilled the requirements of high pathogen LRVs, remote online control and validation, and relatively low chemical consumption.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have