Abstract
Piston diaphragm pumps are used worldwide to transport abrasive and aggressive slurries against high discharge pressures in the mining, mineral processing, and power industries. Intermittent suction and drainage of the diaphragm, however, can lead to pulsating output pressure, which has caused major problems in the application of these pumps. To improve the accuracy of simulations of piston diaphragm pumps and to enable better simulation of their pressure pulsation behavior, it is necessary to carry out a three-dimensional fluid–structure interaction simulation of the pump fluctuation characteristics. This article proposes a simplified simulation model based on the periodic motion characteristics of a piston diaphragm pump, where a ZMB240 piston diaphragm pump serves as the research object. By simplifying the numerical simulation of the model, we are able to analyze the deformation characteristics and the fluctuation characteristics of the piston diaphragm pump under different initial conditions for the pressure-stabilizing air chamber.
Highlights
Introduction to the piston diaphragm pumpPiston diaphragm pumps are widely used in the mining, mineral processing, and power industries to transport abrasive and aggressive slurries against high discharge pressures.[1]
We set the initial pressure of the piston diaphragm pump pressure-stabilizing air chamber in the 0.3–0.7 Minimum pressure: simulated value (MPa) range
Based on the periodic motion of this diaphragm pump, we proposed a simplified method for development of the computational fluid dynamics (CFD) simulation model
Summary
Piston diaphragm pumps are widely used in the mining, mineral processing, and power industries to transport abrasive and aggressive slurries against high discharge pressures.[1] the complex internal flow of a piston diaphragm pump can generate hydraulic excitation forces that cause pressure pulsations.[2] Figure 1 shows the structure of a ZMB240 piston diaphragm pump. This pump consists of a pump body, a side cover, a diaphragm, inlet and outlet valves, an eccentric shaft, a piston, a slider, and an air chamber.
Sign-in/Register to view highlights & summary Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
