Abstract
The high-voltage interconnection (HVI) issue becomes severe in the high-voltage monolithic ICs when single-layer metal is used for lowering the cost. This paper proposes a dual deep-oxide trenches (DDOT) structure for 500V Silicon-on-Insulator Lateral Insulated Gate Bipolar Transistor (SOI-LIGBT) to shield the influence of HVI on the breakdown voltage. Compared with the conventional DDOT structure, HVI region of the proposed DDOT structure is shrunk by employing a shallow trench (T1) and a deep trench (T2). Besides the breakdown mechanism in the off-state, the current density and impact ionization rate distributions in the on-state of the proposed structure are also investigated. The experiments demonstrate that the proposed DDOT structure can fully shield the influence of HVI with significant reduction in the area of silicon region beneath the HVI. With almost the same off-state breakdown voltage (BVoff) of 550V as the conventional DDOT structure, the length of the silicon region under the HVI in the proposed structure is shortened from 45μm to 15μm. Meanwhile, no on-state breakdown voltage (BVon) degradation is observed according to the measured results. The new method proposed in this work can also be used for other types of high-voltage devices such as LDMOS and free-wheeling diode in SOI Monolithic ICs.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.