A new generation of detectors for scanning x-ray beam imaging systems

Abstract

Scanning x-ray beam imaging systems were first developed by American Science and Engineering, Inc. (AS&E) in the early 1970s [1]. Since then, these systems have found a wide range of applications in security inspection and non-destructive testing. Large-area detectors are most frequently used to collect backscattered radiation but smaller transmission detectors are also employed for selected applications. Until recently, only two basic detector designs have been used: large scintillator blocks with attached photomultiplier tubes (PMTs) or large-volume light-sealed boxes, lined with scintillating screens and port windows for PMTs. In both cases, the detectors have required considerable depth to provide acceptable light collection efficiency. A new design recently developed by AS&E relies on wavelength shifting fibres (WSF) for light collection. For the first time, this approach enables the construction of thin large-area detectors. Stacking layers of WSF ribbons and scintillating screens in varying combinations enables optimization of the detection efficiency for different applications. Taking separate readings from different layers provides an energy-sensitive signal combination. Energy sensitivity can be improved further by adding filtration between the signal channels. Several prototype configurations have been built and characterized for both backscatter and transmission imaging. A WSF-based detector has been commercialized for a transmission x-ray imaging application.