Abstract
Nonradiographic 3-D assessment of soft tissue facial structures is an ideal tool to measure 3-D facial change and smartphone apps like Bellus 3D have brought these technologies to our doorsteps. Although this app works well for adults, it doesn't do so well with infants as their stabilization is difficult thus proper alignment becomes problematic often leading to distortion. This seriously hampers the repeatability and reliability of the whole process. A stainless steel rod of 150-cm length is curved into a semicircle of a radius of 42.5 cm. Bases are fabricated at both the ends to firmly hold the stand on the table. A Teflon ring of one inch is made for adjusting the diameter of the camera holder. A camera holder is then attached to the Teflon ring. The mobile holder mounted is free to move within the arc. A 3-D facial scan of a single patient was carried out with the camera mounted on the frame and once without the frame. The same was compared using side-by-side comparison and superimposition of the .STL files from the frontal, profile, and worm's eye view. It was found that considerable distortion was noted around the nasal and paranasal areas when the scan was performed without the frame as compared to the one that was taken with the frame. This technique avoided distortion and the difficulty in turning the baby's head to record the lateral portion of the face.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.