Abstract
In this study, a new controller based on the synchronous reference frame (SRF) in a photovoltraic (PV) panel supported three-phase unified power quality conditioner (PV-UPQC ) is proposed to solve power quality problems in power systems. The serial and parallel active power filters fed with energy by PV panels are used together in the PV-UPQC system. In the proposed controller, measurement values are taken from four different points of the power system. The obtained values and DC voltage generated by PV panels are used to calculate the reference current and voltage values. PWM signals of switches used in active filters are produced using moving average filter and space vector-PWM. The algorithm used in both filters consists of two parts. The first is the mppt algorithm, in which the maximum voltage is obtained from the PV panels, and the second is the SRF-based proposed algorithm, where the reference current or voltage is obtained. Simulation and experimental studies of the proposed controller are applied. When the results obtained are examined, the proposed controller for three-phase PV-UPQC gives better results than the traditional SRF based controller in attenuation of harmonics in current and voltage.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.