Abstract
In this study, a new austenitic Fe-28%Mn-9%Al-6%Cr-1.8%C (in mass%) alloy is developed. Because the alloy contains a high density of fine (Fe,Mn)3AlC carbides within the austenite matrix, the alloy in the as-quenched condition exhibits an excellent combination of strength and ductility comparable to that of the aged FeMnAlC alloys. In addition, owing to the formation of a layer of Cr and Al oxides in the passive film formed on the alloys, the corrosion potential Ecorr (−538 mV) and the pitting potential Epp (−25 mV) of the present alloy in 3.5% NaCl solution are considerably higher than the Ecorr (−920∼−789 mV) and Epp (−500∼−240 mV) values of the as-quenched and aged FeMnAlC alloys. Whereas the tensile strength of the present alloy is almost the same as that of conventional AISI 410 martensitic stainless steel, the present alloy possesses superior ductility than AISI 410 martensitic stainless steel. Furthermore, in 3.5% NaCl solution, the Epp (−25 mV) of the present alloy is noticeably higher than that (−250∼−100 mV) of the conventional AISI 410 martensitic stainless steel. These results indicate that the present alloy in the as-quenched condition can possess high-strength and high-ductility as well as moderate corrosion resistance.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
