A new application of anaerobic rotating biological contactor reactor for heavy metal removal under sulfate reducing condition

Abstract

This study evaluated the performance of a continuously operated laboratory scale anaerobic rotating biological contactor (An-RBC) reactor at 24h and 48h residence time (RT) for heavy metal removal from synthetic wastewater under sulfate reducing condition. A maximum removal of Cu(II) (97%) followed by Cd(II) (90%) and more than 77% removal in case of the other metals, viz Pb(II), Fe(III), Zn(II) and Ni(II) were obtained for a maximum inlet metal concentration in the range 50–175mg/L at 48h RT. Metal loading rates greater than 3.64mg/L·h in case of Cu(II) and 1.87mg/L·h, in case of Fe(III), Pb(II), Ni(II), Zn(II) and Cd(II) are toxic and inhibitory to SRB activity and are therefore, detrimental to the performance of the An-RBC reactor. The metal removal values were slightly reduced at 24h RT and the heavy metal removal was in the order: Cu>Cd>Pb>Fe>Zn>Ni at both the RTs. Sulfate removal results further confirmed that the heavy metal removal is due to sulfide generation in the reactor system. Field emission scanning electron microscopy (FESEM) images clearly revealed the immobilized sulfate reducing bacteria (SRB) onto the support material. Hence, this study demonstrated an excellent potential of the An-RBC reactor for treating metal containing wastewater even at high inlet concentration.