A new analytical tool for the elastic/plastic buckling design of pressure vessels subjected to external pressure

Abstract

This paper deals with the elastic/plastic buckling design of pressure vessels under external pressure loading. The objective is to build a simple analytical tool devoted to the elastic and elastoplastic buckling analysis of pressure equipments. This tool is aimed to provide the critical external pressure of cylindrical pressure vessels with ellipsoidal (or possibly hemispherical) heads. Depending on the geometry of the equipment and material parameters, the first buckling pressure may involve either the cylindrical shell or the closure ends, in the elastic or plastic range. The calculation tool will be thus based on a series of exact or approximate analytical solutions of the critical pressure of each part of the considered equipment. In this paper, the elementary shell structures involved in such pressure equipments are first individually examined. The fundamental critical pressures for each of them are recalled or introduced, both in elasticity and plasticity. The new solutions are validated against reference numerical results obtained through finite element computations. Then, approximate solutions of the critical pressure are derived for the same shells, taking account of specific boundary conditions (and not idealized ones, as before) due to the presence of the remaining part of the equipment. In the end, a VBA Excel software is developed. It is able to provide the mappings of the buckling mode type and the corresponding critical pressures for large ranges of geometric and material parameters in a very efficient way. These analytical solutions are finally confronted to numerical calculations performed on complete pressure equipments and they are shown to give quite reliable results. A discussion is also initiated on the use of such a program to update the current design rules in this scope of application.