Abstract
The resin transfer molding (RTM) process shows considerable advantages in composite manufacturing. Nevertheless, the part quality manufactured by RTM is sensitive to material and process variations during the preform impregnation. To improve the process robustness and achieve better process control, a methodology for resin flow monitoring based on a combination of a sensing system and a neural network model is proposed, which can be easily implemented into a generic RTM process. Using pressure data provided by a limited number of sensors distributed over the mold surface, the proposed method allows the prediction of flow-front patterns at any impregnation time. The dataset for training is generated by physical-based simulations. Considering the permeability changes caused by uncertainty conditions, the permeability tensor is modeled with random variations. The network parameters are obtained by trial-and-error. Furthermore, the sensor distribution scheme and the dataset size are identified as the sensitive factors of the model. Finally, the predicted results are verified by numerical solutions. This method can be used to avoid the formation of voids and improve the final part quality.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have