A nanocomposite prepared from magnetite nanoparticles, polyaniline and carboxy-modified graphene oxide for non-enzymatic sensing of glucose.

Abstract

The authors report on the synthesis of carboxy functionalized graphene oxide (fGO) decorated with magnetite (Fe3O4) nanoparticles. The resulting nanomaterial was used to prepare a composite with polyaniline (PANI) which was characterized by UV-vis, Fourier transform-infrared and Raman spectroscopies. Its surface morphologies were characterized by atomic force and scanning electron microscopies. A screen-printed carbon electrode was then modified with the nanocomposite to obtain an enzyme-free glucose sensor. The large surface of fGO and Fe3O4 along with the enhanced charge transfer capability of PANI warrant a pronounced electrochemical response (typically measured at 0.18V versus Ag/AgCl) which is suppressed in the presence of glucose. This reduction of current by glucose was used to design a sensitive method for quantification of glucose. The response of the modified SPCE is linear in the 0.05μM - 5mM glucose concentration range, and the lower detection limit is 0.01μM. Graphical abstract Schematic illustration of in-situ anchoring of Iron oxide on functionalized graphene oxide and synthesis of its polymeric nanocomposite for non-enzymatic detection of Glucose. The nanocomposite modified screen printed interface enabled monitoring of glucose at lower potential with higher precision. GO (graphene oxide), fGO (functionalized graphene oxide), PANI (polyaniline).