Abstract
A Computational Fluid Dynamics (CFD) framework is established to investigate the microscale transport phenomena in the evaporating extended meniscus region formed in rectangular microchannels. A wide range of microchannel widths (W = 1 to 250 µm) and wall superheats (ΔT = 0.01 to 5.0 K) are considered. Prior to performing CFD simulations, it is first necessary to employ thin-film evaporation modeling based on an augmented Young–Laplace model and kinetic-theory based model for the evaporating mass flux across curved surfaces to find the exact shape of the liquid-vapor interface along with disjoining and capillary pressure distributions. Two widely-used methods for the determination of boundary conditions (BCs) at the beginning of the thin-film region (i.e., setting δ0″ = 0 and finding δ0′ by the far-field BC or setting δ0′ = 0 and finding δ0″ by the far-field BC), where δ is film thickness, are thoroughly examined and the first approach is recommended because of its better convergence and ease of implementation in the thin-film evaporation model. Then, the two-dimensional domain of the extended meniscus is generated and discretized to simulate the evaporating liquid flow through the UDF programming in ANSYS Fluent. The developed framework is shown to be a simple yet powerful and practical method for accurately predicting the evaporation mass and heat fluxes from extended menisci in microchannels. The CFD simulation results indicate that the previous one-dimensional models which represent the state of the art in the literature in the field are not able to predict the rate of evaporative heat transfer from the extended meniscus in microchannels with an acceptable degree of accuracy. Based on the CFD simulations results, a multiple regression analysis is employed to establish several simple thermal resistance correlations. The correlations can be straightforwardly integrated into macroscale mathematical models of micro and miniature heat pipes for analyzing their thermal characteristics.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.