Abstract

Abstract. This paper examines the operational performance of the Community Multiscale Air Quality (CMAQ) model simulations for 2002–2006 using both 36-km and 12-km horizontal grid spacing, with a primary focus on the performance of the CMAQ model in predicting wet deposition of sulfate (SO4=), ammonium (NH4+) and nitrate (NO3−). Performance of the wet deposition estimates from the model is determined by comparing CMAQ predicted concentrations to concentrations measured by the National Acid Deposition Program (NADP), specifically the National Trends Network (NTN). For SO4= wet deposition, the CMAQ model estimates were generally comparable between the 36-km and 12-km simulations for the eastern US, with the 12-km simulation giving slightly higher estimates of SO4= wet deposition than the 36-km simulation on average. The result is a slightly larger normalized mean bias (NMB) for the 12-km simulation; however both simulations had annual biases that were less than ±15 % for each of the five years. The model estimated SO4= wet deposition values improved when they were adjusted to account for biases in the model estimated precipitation. The CMAQ model underestimates NH4+ wet deposition over the eastern US, with a slightly larger underestimation in the 36-km simulation. The largest underestimations occur in the winter and spring periods, while the summer and fall have slightly smaller underestimations of NH4+ wet deposition. The underestimation in NH4+ wet deposition is likely due in part to the poor temporal and spatial representation of ammonia (NH3) emissions, particularly those emissions associated with fertilizer applications and NH3 bi-directional exchange. The model performance for estimates of NO3− wet deposition are mixed throughout the year, with the model largely underestimating NO3− wet deposition in the spring and summer in the eastern US, while the model has a relatively small bias in the fall and winter. Model estimates of NO3− wet deposition tend to be slightly lower for the 36-km simulation as compared to the 12-km simulation, particularly in the spring. The underestimation of NO3− wet deposition in the spring and summer is due in part to a lack of lightning generated NO emissions in the upper troposphere, which can be a large source of NO in the spring and summer when lightning activity is the high. CMAQ model simulations that include production of NO from lightning show a significant improvement in the NO3− wet deposition estimates in the eastern US in the summer. Overall, performance for the 36-km and 12-km CMAQ model simulations is similar for the eastern US, while for the western US the performance of the 36-km simulation is generally not as good as either eastern US simulation, which is not entire unexpected given the complex topography in the western US.

Highlights

  • Atmospheric deposition of sulfur and nitrogen cause deleterious impacts on terrestrial and aquatic ecosystems due to acidification and excess nutrients (Lovett and Tear; 2008, Driscoll et al, 2001, 2003; Fenn et al, 2003)

  • This paper examines the performance of the Community Multiscale Air Quality (CMAQ) model sulfate (SO=4 ), nitrate (NO−3 ) and ammonium (NH+4 ) wet deposition estimates for the 2002–2006 period over the continental United States (CONUS) using two model grid-spacing options, namely 12-km and 36-km grid spacing

  • The underestimation in NH+4 wet deposition may be due in large part to the poor temporal and spatial representation of NH3 emissions, those emissions associated with fertilizer applications and bi-directional exchange of NH3 from soil and vegetation surfaces

Read more

Summary

Introduction

Atmospheric deposition of sulfur and nitrogen cause deleterious impacts on terrestrial and aquatic ecosystems due to acidification and excess nutrients (Lovett and Tear; 2008, Driscoll et al, 2001, 2003; Fenn et al, 2003). A regional air quality model like the Community Multiscale Air Quality (CMAQ; Byun and Schere, 2006) model can be used to provide a more spatially complete estimate of total deposition to the sensitive ecosystems. Uiuc.edu) monitoring sites provide the most complete spatial coverage of observed wet deposition across the US on a temporal scale suitable for air quality model evaluations. In cases where deficiencies in model performance are identified, model improvements, such as the production of NOx from lightning and inclusion of bi-directional flux of NH3, are tested and their impacts on model performance assessed Together, these analyses provide insight into the strengths and weaknesses of the CMAQ model in estimating wet deposition of sulfur and nitrogen to sensitive ecosystems

Meteorology
Emissions
CMAQ model configuration
Assessing model performance
Precipitation bias adjustment
Assessment of CMAQ wet deposition performance
Precipitation
Precipitation bias correction
Bi-Directional NH3 exchange
Lightning generated NO
Findings
Summary
Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call