A Multiphase, Multicomponent Reservoir-Simulation Framework for Miscible Gas and Steam Coinjection

Abstract

SummaryThe solvent thermal resource innovation process (STRIP), a downhole steam-generation technology, has the capacity to show improved recovery factors with a significantly reduced environmental footprint compared with traditional thermal-enhanced-oil-recovery (TEOR) methods, most notably by delivering all the combustion heat to the pay zone. In this effort, a quarter-symmetry inverse-five-spot model and a multiphase, multicomponent reservoir-simulation framework were used to simulate the STRIP technology. Commercial simulators such as STARS - Thermal and Advanced Processes Reservoir Simulator [Computer Modelling Group Ltd. (CMG), Calgary, Alberta, Canada; CMG 2015b] often use the K-value approach to simulate TEOR. However, the method cannot simulate STRIP's carbon dioxide (CO2) and steam coinjection because the K-value method does not consider miscible gas injection. On the other hand, CMG's GEM - Compositional and Unconventional Simulator (CMG 2015a) includes the effects of miscible gases but does not provide comprehensive support for steam-injection processes, which are better handled by STARS. The novel simulation framework developed here leverages and combines the individual strengths of STARS (thermal features) and GEM (compositional features). In this framework, STARS simulated steam injection (but cannot directly simulate the effects of CO2) and was the governing model that synchronized temperature, pressure, and phase saturations for two parallel iterations of the GEM models (GEM-1 and GEM-2) at each timestep. Immiscible methane (CH4) was added to GEM models to maintain gas saturations equivalent to the STARS model. GEM-1 simulated hot-water and CH4 injection, but at increased rates to yield a pressure field and gas saturations equivalent to STARS. A final run of GEM-1 injected both CO2 and hot water and demonstrated the expected increase in oil production. Calibrated injection rates from GEM-1 were specified in GEM-2 to ensure equivalence of the pressure field. Next, the GEM-2 model also simulated hot-water and CH4 injection, but matched both water and oil productions along with oil saturations from the final GEM-1 run by altering relative permeabilities. Finally, the updated relative permeabilities were fed back to STARS, and iteration proceeded. Results from this framework were verified against a STARS steam-injection simulation. Finally, when considering coinjection of CO2, STRIP's superior performance was demonstrated through increased oil recovery and a lower steam/oil ratio (SOR).