Abstract
A 28 GHz fully differential eight-channel beamforming IC (BFIC) with multimode operations is implemented in 65 nm CMOS technology for use in phased array transceivers. The BFIC has an adjustable gain and phase control on each channel to achieve fine beam steering and beam pattern. The BFIC has eight differential beamforming channels each consisting of the two-stage bi-directional amplifier with a precise gain control circuit, a six-bit phase shifter, a three-bit digital step attenuator, and a tuning bit for amplitude and phase variation compensation. The Tx and Rx mode overall gains of the differential eight-channel BFIC are around 11 dB and 9 dB, respectively, at 27.0–29.5 GHz. The return losses of the Tx mode and Rx mode are >10 dB at 27.0–29.5 GHz. The maximum phase of 354° with a phase resolution of 5.6° and the maximum attenuation of 31 dB, including the gain control bits with an attenuation resolution of 1 dB, is achieved at 27.0–29.5 GHz. The root mean square (RMS) phase and amplitude errors are <3.2° and <0.6 dB at 27.0–29.5 GHz, respectively. The chip size is 3.0 × 3.5 mm2, including pads, and Tx mode current consumption is 580 mA at 2.5 V supply voltage.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.