Abstract
An ATP bioluminesce assay (ATP Water Test), measuring organic bioburden including microbes, was used to monitor the cleanliness of flexible GI endoscopes after the manual cleaning step of the decontamination and disinfection process, in seven US hospitals.
Highlights
An ATP bioluminesce assay (ATP Water Test), measuring organic bioburden including microbes, was used to monitor the cleanliness of flexible GI endoscopes after the manual cleaning step of the decontamination and disinfection process, in seven US hospitals
The level of ATP contamination post manual cleaning was found to be statistically different by scope type (p
Using the 200 relative light units (RLUs) value proposed in the literature1,2 as a pass-fail cleanliness criterion after manual cleaning, the observed failure rates were found to be highest for duodenoscopes (31%, 15/48) and gastroscopes (22%, 38/168) and lowest for colonoscopes (3%, 6/182)
Summary
An ATP bioluminesce assay (ATP Water Test), measuring organic bioburden including microbes, was used to monitor the cleanliness of flexible GI endoscopes after the manual cleaning step of the decontamination and disinfection process, in seven US hospitals. Objectives To characterize the effectiveness of the manual cleaning step during reprocessing of flexible endoscopes, from site to site as well as by type of endoscope. Methods Duodenoscopes, gastroscopes, and colonoscopes were tested using an ATP Water Test.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.