Abstract

Exploration and development practices have proved that staged volumetric fracturing stimulation in horizontal wells is a key technology for tight sandstone gas development, and reservoir sweet spot is an important basis for the perforation position selection and staged fracturing in the process of well location deployment and reservoir stimulation. Tight sandstone reservoirs are usually characterized by sandstone and mudstone interlayers with different thicknesses, and complex natural fracture distribution and geostress state. It is hard to predict “geological-engineering” dual sweet spots, and these two kinds of sweet spots are usually in different zones. As a result, there lacks a basis for the optimization of fracturing parameters to stimulate tight sandstone reservoirs. This paper establishes a geological sweet spot prediction model which takes into account total hydrocarbon content, reservoir porosity and other factors, then puts forward a 3D multi-scale engineering sweet spot evaluation method which takes into account lithology, fracture morphology, fracture mechanical behavior, and dilatation and shear dilation effect, and finally a “geological-engineering” dual sweet spot evaluation model for tight sandstone reservoirs. Two wells in the tight sandstone gas field in the Linxing Block of the Ordos Basin were selected as a case, and the dual sweet spot profiles, fracturing pressure and SRV were compared and analyzed. The results show that: 1) shear dilation angle influences the distribution of engineering sweet spots at the most in the study area, followed by dissipated energy, elastic modulus and fracture energy; 2) the geological sweet spot zone with a high coefficient is not necessarily the pay zone with high shale gas production; 3) the engineering sweet spot zone with a high coefficient needs lower fracture pressure and can be stimulated relatively sufficiently; 4) high-quality geological sweet spots and high-quality engineering sweet spots are poorly consistent in spatial location. In conclusion, the stimulation of tight sandstone gas reservoirs shall take geological sweet spot as the basis and engineering sweet spot as the guarantee, and the distribution of dual sweep spots should be considered comprehensively. The multi-scale “geological-engineering” dual sweet spot evaluation method proposed in this paper provides important technical support for the prediction of sweet spots of the tight sandstone gas and the optimization of development schemes in the study area.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call