Abstract
Due to the small billet size in micro forming, each grain, especially that on the surface layer, has direct influence on the deformation behavior of the billet. The multi-region model was proposed for simulating the micro bulk forming process in this paper. The object in the model is divided into three different regions: the inner polycrystal region, the grain interior of the surface region and the grain-boundary layer in the surface region. Each surface grain has different orientation. Depending on the Hall–Petch formula, which is applicable to describe polycrystal materials, and introducing scale parameters, the constitutive equation of each region is deduced based on the unidirectional compression tests data of the copper specimen. Using the multi-region model, the coining process with micro feature is simulated to investigate the size effect in micro forming. Moreover, an experiment of coining process with micro-feature is performed to verify the correctness of the multi-region simulation model. The experimental results show a good agreement with those in numerical simulation.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
