A Monolithic 156 Mb/s Clock and Data Recobery PLL Circuit Using the SampleandHold Technique

Abstract

The PLL circuit described here performs the function of data and clock recovery for random data patterns by using a sample-and-hold technique, and four component circuits (a phase comparator, a delay circuit, a voltage-controlled oscillator, and a S/H switch with a low-pass-filter) were specially designed to further stabilize the PLL operation. A test chip fabricated using Si bipolar process technology demonstrated error-free operation with an input of 2 23 -1 PRBS data at 156 Mb/s. The rms data pattern jitter was reduced to only 1.2 degrees with only an external power supply bypass capacitor.