Abstract
The paper presents monitoring and assessment system of battery LiFePO<sub>4</sub> performance that applied on a stand-alone photovoltaic system. A stand-alone photovoltaic system is constructed by photovoltaic module 50 Watt Peak, Pulse Width Modulation solar controller, battery module LiFePO<sub>4</sub> battery (12 Volt 21 Ah), and street light 10 watt. To overcome the data acquisition, a simple monitoring system has been designed using LabVIEW Interface for Arduino. The voltage divider, current sensing type ACS712, temperature and humidity sensor, and light intensity sensor were used to collect the data. The data processed by a dual microcontroller (ATmega-2560 and ATmega-328) and LabVIEW software on Personal Computer. The assessment of stand-alone photovoltaic system includes battery LiFePO<sub>4</sub> performance (State of Charge, voltage, and current) during charging and discharge condition, the power efficiency, and environmental condition (temperature, humidity and solar radiation). In the discharge condition, voltage battery and State of Charge decreased about 40% after 12 hours operated. In the charge condition, the current battery fluctuated in the range of 0.10 A-1.95 A and the State of Charge increased up to 25% after 8 hours operated. It indicates that the power of the battery has always lacked.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: International Journal of Power Electronics and Drive Systems (IJPEDS)
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
