Abstract
In a previous abstract, a method was described for measuring the sound absorptivity of small specimens. Sound from a loudspeaker travels down a cast-iron tube 8 inches in diameter, strikes the specimen under test at an angle of 45 degrees and is reflected down a side tube where it is measured. By measuring the sound reflected down the side tube from a thick glass plate, and by measuring the sound in the side tube when an exponential horn is substituted for the specimen, it is possible to arrive at the reflectivity and consequently the absorptivity of the specimen. The earlier apparatus has been redesigned and measurements have been taken on a large number of materials. For the frequency of 500 c.p.s. the method has given absorptivities for commercial materials that are in satisfactory agreement with those determined by reverberation measurements.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.