Abstract
Background:In order to improve the targeting capability and trajectory planning and provide a more secure probe-holding system, a simple method to use a stereotactic frame as an instrument holder for the frameless stereotactic system was devised.Methods:A modified stereotactic frame and BrainLab vector vision neuronavigation sys¬tem were used together. The patient was placed in the stereotactic head-holder to which a reference array of the neuronavigation system was attached. The pointer of the frameless system was placed in the probe-holder of the frame. An offset in distances was kept between the radius of the arch of the frame and the tip of the pointer so that the pointer was always outside the head during navigation. The offset correction was made on the BrainLab monitor so that the center of the arc of the frame was at the tip of the probe line on the monitor. Then, using the frame’s coordinate adjuster system, the center of the arc was positioned on the target. This method was used to insert depth electrodes (seven procedures) and gain access to the temporal horn (three procedures).Results:Post-operative scans showed that the accuracy was within 2.5 mm in all three planes for depth electrode placement, and easy access to the temporal horn was obtained in two other patients.Conclusion:This is a simple method to use a stereotactic frame to improve coordinate and trajectory adjustments and provides a better method to stabilize the pointer and the probe-holder during frameless stereotactic procedures.
Highlights
Horsley first introduced frame-based stereotaxis into neurosurgery.[8]
The stereotactic frame is a modified Patil system[13] that was custom made at our facility
Postoperative scans showed the electrodes to be within 2.5 mm of the planned target in all three planes
Summary
A modified stereotactic frame and BrainLab vector vision neuronavigation system were used together. The patient was placed in the stereotactic head-holder to which a reference array of the neuronavigation system was attached. The pointer of the frameless system was placed in the probe-holder of the frame. The offset correction was made on the BrainLab monitor so that the center of the arc of the frame was at the tip of the probe line on the monitor. Using the frame’s coordinate adjuster system, the center of the arc was positioned on the target. This method was used to insert depth electrodes (seven procedures) and gain access to the temporal horn (three procedures)
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.