Abstract
The surface fracture toughness is an important mechanical parameter for studying the failure behavior of air plasma sprayed (APS) thermal barrier coatings (TBCs). As APS TBCs are typical multilayer porous ceramic materials, the direct applications of the traditional single edge notched beam (SENB) method that ignores those typical structural characters may cause errors. To measure the surface fracture toughness more accurately, the effects of multilayer and porous characters on the fracture toughness of APS TBCs should be considered. In this paper, a modified single edge V-notched beam (MSEVNB) method with typical structural characters is developed. According to the finite element analysis (FEA), the geometry factor of the multilayer structure is recalculated. Owing to the narrower V-notches, a more accurate critical fracture stress is obtained. Based on the Griffith energy balance, the reduction of the crack surface caused by micro-defects is corrected. The MSEVNB method can measure the surface fracture toughness more accurately than the SENB method.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.