Abstract
Zinc oxide varistors are among the most important surge arresters. The current-voltage (I–V) behaviour of these devices can be approximated by a model of electrical networks of grain boundaries arranged in 3D space, where nonlinear resistors mimic the effective grain boundary behaviour of the varistor microstructure. A simplified version of the network model, namely parallel circuits of chains of serially connected resistors of different length (path model), is derived from a fully 3D model of the polycrystalline microstructure. A comparison of the path model with a complex resistor network based on the 3D model demonstrates that the network of highly nonlinear resistors has a very similar DC I–V characteristic as parallel paths of these resistors connected in series. The path model, whose parameters were adapted from microscopic I–V measurements, is able to reproduce the macroscopic I–V behaviour of real low-voltage zinc oxide varistors.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callSimilar Papers
More From: Open Ceramics
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
