A model for the analysis of loss of decay heat removal during loss of coolant accident in MTR pool type research reactors

Abstract

During a loss of coolant accident leading to total emptying of the reactor pool, the decay heat could be removed through air natural convection. However, under partial pool emptying the core is partially submerged and the coolant circulation inside the fuel element could no more be possible. Under such conditions, a core overheat takes place, and the thermal energy is essentially diffused from the core to its periphery by combined thermal radiation and conduction. In order to predict fuel element temperature evolution under such conditions a mathematical model is performed. The model is based on a 3D geometry and takes into account a variety of core configurations including fuel elements (standard and control), reflector elements and grid plates. The homogeneous flow model is used and the fluid conservation equations are solved using a semi-implicit finite difference method. Preliminary tests of the developed model were made by considering a series of hypothetical accidents. In the current framework a loss of decay heat removal accidents in the IAEA benchmark open pool MTR-type research reactor is considered. It is shown that in the case of a low core immersion height no water boiling is observed and the fuel surface temperature rise remains below the melting point of the aluminium cladding.