Abstract
This paper describes a new technique which has been implemented on the JET tokamak to investigate integrated real-time control of several plasma profiles simultaneously (such as current, temperature and pressure) and reports the results of the first experimental tests. The profiles are handled through their projection on a suitable basis of functions according to the Galerkin scheme. Their response to three actuators (heating and current drive powers injected in the plasma) is linearized in an experimentally deduced multi-input multi-output model. The singular value decomposition of this model operator allows us to design a distributed-parameter real-time controller which maximizes the steady state decoupling of the multiple feedback loops. It enables us to control several coupled profiles simultaneously, with some degree of fuzziness to let the plasma evolve towards an accessible non-linear state which is the closest to the requested one, despite a limited number of actuators.The first experiments using these techniques show that different current and electron temperature profiles can be obtained and sustained by the controller during a closed-loop operation time window. Future improvements and perspectives are briefly mentioned.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.