A Mobile Sensing Framework for Bridge Modal Identification through an Inverse Problem Solution Procedure and Moving-Window Time Series Models.

Abstract

With the rise and development of smart infrastructures, there has been a great demand for installing automatic monitoring systems on bridges, which are key members of transportation networks. In this regard, utilizing the data collected by the sensors mounted on the vehicles passing over the bridge can reduce the costs of the monitoring systems, compared with the traditional systems where fixed sensors are mounted on the bridge. This paper presents an innovative framework for determining the response and for identifying modal characteristics of the bridge, utilizing only the accelerometer sensors on the moving vehicle passing over it. In the proposed approach, the acceleration and displacement response of some virtual fixed nodes on the bridge is first determined using the acceleration response of the vehicle axles as the input. An inverse problem solution approach based on a linear and a novel cubic spline shape function provides the preliminary estimations of the bridge's displacement and acceleration responses, respectively. Since the inverse solution approach is only capable of determining the response signal of the nodes with high accuracy in the vicinity of the vehicle axles, a new moving-window signal prediction method based on auto-regressive with exogenous time series models (ARX) is proposed to complete the responses in the regions with large errors (invalid regions). The mode shapes and natural frequencies of the bridge are identified using a novel approach that integrates the results of singular value decomposition (SVD) on the predicted displacement responses and frequency domain decomposition (FDD) on the predicted acceleration responses. To evaluate the proposed framework, various numerical but realistic models for a single-span bridge under the effect of a moving mass are considered; the effects of different levels of ambient noise, the number of axles of the passing vehicle, and the effect of its speed on the accuracy of the method are investigated. The results show that the proposed method can identify the characteristics of the three main modes of the bridge with high accuracy.