A mm-Wave 5G System Architecture With Enhanced-Gain Antenna Solution

Abstract

A millimeter-wave (mm-wave) system architecture with enhanced-gain antenna solution is proposed for fifth-generation (5G) wireless communications. To enhance the antenna gain, the surface wave currents are converted to constructive far-field radiations through a novel two-stage metallic and dielectric rings. By applying low-profile dielectric ring, the electric near-field distributions of the grounded quarter-wavelength metallic ring are modified to create radiation apertures with appropriate polarization and orientation. The mutual coupling between transmit/receive antennas and cross polarizations is reduced by 7 and 5 dB, respectively, and the gain is enhanced over 4 dB. Low-loss mm-wave transitions are implemented in a standard FR-4 printed circuit board and in an interposer substrate to integrate the active antenna with the rest of the wireless system on a compact universal serial bus (USB)-interface platform. To evaluate the interposer package and define the output power of the embedded 60-GHz RF IC, an evaluation module with a standard WR-15 waveguide interface is designed and implemented. A prototype of the architecture, which is entirely realized using low-cost organic substrates, is presented and evaluated by experiments. Excellent correlations are achieved between simulations and measurements, demonstrating more than 25 dBm of equivalent isotropically radiated power (EIRP) over the unlicensed 60-GHz frequency band.