Abstract
Millimeter wave (mm-wave) antenna modules with switchable beam radiation provide a potential solution for enabling flexible wireless links and high data rate in Internet of Things (IoT) networks. Aiming to simultaneously fulfill a wide coverage and follow the cost-effective principle of IoT devices, a novel mm-wave wideband antenna module with switchable fanbeam radiation is proposed based on an air-filled planar Cassegrain beam-former. A comprehensive design procedure combing the theoretical calculation and differential evolution (DE) algorithm is first introduced to construct the beam-former with wide-angle scanning capability. The desirable apertureshared switchable fan-beam radiation with high crossover is then obtained with the aid of a proposed two-feed-per-beam (2FPB) scheme based on a low-loss integrated switch network. A prototype of the antenna in the Ka-band is fabricated by simultaneously adopting the metallic three-dimensional (3D) printing and printed circuit board (PCB) technology. Excellent operating characteristics, including a wide bandwidth of more than 32%, twenty stable fan-shaped radiation beams scanning over a wide angular range of ±45∘ in the H-plane, a high beam crossover of about -3 dB, a gain of up to 19.6 dBi, and a radiation efficiency of greater than 80% are demonstrated experimentally. With the ability to fulfill the radio coverage within a wide conical area, the presented antenna module would be an attractive candidate for the fifth generation (5G) IoT applications.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.