Abstract
Part I [Metall. Mater. Trans. B, 2014, DOI: 10.1007/s11663-014-0117-9 ] presented a comprehensive thermal, fluid flow, and solidification model that can predict the temperature distribution and flow characteristics for the processing of CMSX-4 alloy powder through scanning laser epitaxy (SLE). SLE is an additive manufacturing technology aimed at the creation of equiaxed, directionally solidified and single-crystal (SX) deposits of nickel-based superalloys using a fast-scanning laser beam. Part II here further explores the Marangoni convection-based model to predict the solidification microstructure as a function of the conditions at the trailing edge of the melt pool formed during the SLE process. Empirical values for several microstructural characteristics such as the primary dendrite arm spacing (PDAS), the columnar-to-equiaxed transition (CET) criterion and the oriented-to-misoriented transition (OMT) criterion are obtained. Optical microscopy provides visual information on the various microstructural characteristics of the deposited material such as melt depth, CET location, OMT location, PDAS, etc. A quantitative and consistent investigation of this complex set of characteristics is both challenging and unprecedented. A customized image-analysis technique based on active contouring is developed to automatically extract these data from experimental micrographs. Quantitative metallography verifies that even for the raster scan pattern in SLE and the corresponding line heat source assumption, the PDAS follows the growth relation w ~G −0.5 V −0.25 (w = PDAS, G = temperature gradient and V = solidification velocity) developed for marginal stability under constrained growth. Models for the CET and OMT are experimentally validated, thereby providing powerful predictive capabilities for controlling the microstructure of SX alloys processed through SLE.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
