Abstract
A MEMS vapor-jet pump for vacuum generation in miniaturized analytical systems, e.g. micro mass-spectrometers, is presented. A high velocity nitrogen- or water-vapor-jet is used for vacuum generation. Starting from atmospheric pressure, a high throughput of more than 50 ml/min and an ultimate pressure of 495 mbar were obtained with this new type of micropump. An approach for the full integration of all components of the pump is presented and validated by experimental results. The pump is fabricated from silicon and glass substrates using standard MEMS fabrication techniques including DRIE, trichlorosilane MVD and metal-assisted chemical etching for porous silicon fabrication. Micromachined pressure sensors based on the Pirani principle have been developed and integrated into the pump for monitoring.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.