Abstract
A linear array of microscale thermal anemometers has been designed, fabricated and characterized. The sensitive element consists of a self-compensated-stress multilayer (Ni/W) patterned to form a wire with length, width, and thickness close to 200 μm, 5 μm and 2 μm respectively. The wire is deposited and supported by prongs made of nano-crystalline diamond (NCD) of about 2 μm in thickness. Due to its high Young’s modulus, NCD allows a very high mechanical toughness without the need for thicker support for the hot wire. Also, depending on grain size, the NCD is able to present thermal conductivity smaller than 10 W mK−1, providing good thermal insulation from the substrate and less conductive end losses to the prongs. The sensor was characterized experimentally. Its electrical and thermal properties were obtained first in the absence of fluid flow. The results confirm the effectiveness of thermal insulation and the mechanical robustness of the structure. The fluidic characterizations were performed and analysed in the case of an airflow with velocities of up to 30 m s−1.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
