A methodology for fault diagnosis in large chemical processes and an application to a multistage flash desalination process: Part I

Abstract

Abstract This work presents a new strategy for fault diagnosis in large chemical processes (E.E. Tarifa, Fault diagnosis in complex chemistries plants: plants of large dimensions and batch processes. Ph.D. thesis, Universidad Nacional del Litoral, Santa Fe, 1995). A special decomposition of the plant is made in sectors. Afterwards each sector is studied independently. These steps are carried out in the off-line mode. They produced vital information for the diagnosis system. This system works in the on-line mode and is based on a two-tier strategy. When a fault is produced, the upper level identifies the faulty sector. Then, the lower level carries out an in-depth study that focuses only on the critical sectors to identify the fault. The loss of information produced by the process partition may cause spurious diagnosis. This problem is overcome at the second level using qualitative simulation and fuzzy logic. In the second part of this work, the new methodology is tested to evaluate its performance in practical cases. A multiple stage flash desalination system (MSF) is chosen because it is a complex system, with many recycles and variables to be supervised. The steps for the knowledge base generation and all the blocks included in the diagnosis system are analyzed. Evaluation of the diagnosis performance is carried out using a rigorous dynamic simulator.