A Method to Improve Activation of Implanted Dopants in SiC

Abstract

ABSTRACTImplantation of dopant ions in SiC has evolved according to the assumption that the best electrical results (i.e., carrier concentrations and mobility) are achieved by using the highest possible processing temperature. This includes implantation at > 600°C followed by furnace annealing at temperatures as high as 1750°C. Despite such aggressive and extreme processing, implantation suffers because of poor dopant activation, typically ranging between < 2%–50% with p-type dopants represented in the lower portion of this range and n-types in the upper. Additionally, high-temperature processing can led to several problems including changes in the stoichiometry and topography of the surface, as well as degradation of the electrical properties of devices. A novel approach for increasing activation of implanted dopants in SiC and lowering the activation temperature will be discussed. This approach utilizes the manipulation of the ion-induced damage to enhance activation of implanted dopants. It will be shown that nearly amorphous layers containing a small amount of residual crystallinity can be recrystallized at temperatures below 900°C with little residual damage. It will be shown that recrystallization traps a high fraction of the implanted dopant residing within the amorphous phase (prior to annealing) onto substitutional sites within the SiC lattice.