Abstract
The trial production and the inspection test of a three-dimensional standard gauge equipment are carried out. Two types of equipment are designed for the calibration test of the three-coordinate measuring machine(3CMM). Each equipment is fabricated from precision steel balls arranged on a base plate- (1) 20 pieces of ball are placed in a rectangular lattice shape on nearly the same plane - (2) 3 of 9 pieces are spaced on three different heights. The measuring probe is positioned on the balls and the center coordinates are measured to determine the three-dimensional relation of each ball position. The inspection test of the standard gauges are performed with the 3CMM whose discrete distribution of the error vector is already known. The repeatability and the reproducibility are observed in the test. As a result, the standard gauge equipment built as a trial proved to be adequate for practical use in the calibration test of other 3CMM.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series C
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
