A method for the estimation of oil film parameters in an asymmetric rotor-bearing system

Abstract

PurposeAsymmetric rotating machinery supported by oil film bearings is relatively common in practical applications. The purpose of this study is to propose a method for estimating the oil film parameters of the bearings in an asymmetric rotor-bearing system.Design/methodology/approachThe proposed method requires the finite element model and translational displacement responses at the center of mass and bearings locations to form a regression equation to estimate the unknown parameters. Due to the transverse stiffness of the asymmetric rotor is not symmetrical, the analysis and parameter estimation procedures are performed in a rotating coordinate. Numerical simulations were carried out to illustrate the vibration characteristics of the asymmetric rotor system. The proposed method is applied to the simulated responses to estimate the assumed oil film parameters. The influence of the estimated parameter deviations on the rotor dynamic characteristics is discussed.FindingsThe vibration characteristics of asymmetric rotors are different from those of symmetrical rotors. The bearing parameters estimated by the proposed method are close to the assumed values, within a maximum error of 9%. The deviations of the estimated parameters have little effect on the vibration characteristic of the rotor system.Originality/valueThe proposed method does not require changing the rotational speed or applying additional excitation force to the rotor, which is suitable for the field test.Peer reviewThe peer review history for this article is available at: https://publons.com/publon/10.1108/ILT-04-2023-0111/