Abstract
Torsional fatigue tests were performed on 60Sn-40Pb solder under strain control, and a method for the solder fatigue life prediction was investigated. The type of specimen was a thin-walled cylinder. Two cycling frequencies of 0.001 Hz and 0.01 Hz were used at 303 K. Using the test data at 0.03-1.0 Hz shown in the previous paper, as well as the present test data, the following results were obtained. ( 1 )The fatigue life and the plastic shearing strain range, which was found by a partition of the inelastic shearing strain range, could be correlated by the Coffin-Manson law for each cycling frequency. ( 2 )A life prediction formula was obtained on the basis of the strain-range partitioning approach and the linear cumulative damage rule for the superposition of both plastic and creep deformations. The values calculated by the formula nearly coincided with the test results.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series A
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.