Abstract

Zinc is mostly extracted from oxidized zinc and zinc sulfide minerals, and this process involves flotation as a key step. While it is easier to float the sulfide mineral, its consumption and depletion has led to an increased reliance on oxidized zinc minerals, including smithsonite. Hence, the development of efficient ways of collecting smithsonite by flotation is an important objective. Herein, we describe the use of 2-(hexadecanoylamino)acetic acid (HAA), a novel surfactant, as a collector during smithsonite flotation. The mechanism and flotation performance of HAA during smithsonite flotation was investigated by total organic carbon (TOC) content studies, zeta potential measurements, Fourier-transform infrared (FTIR) spectroscopy, and X-ray photoelectron spectroscopy (XPS) analyses, combined with microflotation experiments. The flotation results revealed that HAA was an excellent collector in pulp over a wide pH range (9–12) and at a relatively low concentration (2 × 10−4 mol/L), at which a recovery of close to 90% of the smithsonite mineral was obtained. TOC content studies revealed that the good flotation recovery was ascribable to large amounts of collector molecule adsorbed on the smithsonite surface, while zeta potential measurements showed that the HAA was chemically adsorbed onto the smithsonite. FTIR and XPS analyses revealed that the HAA collector molecules adsorbed onto the smithsonite surface as zinc–HAA complexes involving carboxylate moieties and Zn sites on the smithsonite surface in alkaline solution.

Highlights

  • Oxidized zinc and zinc sulfide ores are the primary naturally occurring zinc ores, and these ores are mainly processed by flotation [1,2]

  • The optimal flotation recovery of smithsonite was achieved at pH 9

  • HAA surfactant was used for the first time as a collector for smithsonite flotation

Read more

Summary

Introduction

Oxidized zinc and zinc sulfide ores are the primary naturally occurring zinc ores, and these ores are mainly processed by flotation [1,2]. The development of methods for the efficient processing of zinc oxide ores has become a hot research topic in recent years [3,4,5]. The oxidized mineral is more difficult to float than the sulfide mineral, due to the greater solubility of the surface of the oxidized mineral than that of the sulfide mineral in solution [6,7]. Direct flotation and sulfurized flotation are the main methods used to process oxidized zinc minerals. The oxidized zinc mineral is pre-treated with sodium sulfide, an activator, prior to flotation, which transforms the surface properties of the oxidized mineral into those of the sulfide mineral [3,9,10]. There are Minerals 2019, 9, 15; doi:10.3390/min9010015 www.mdpi.com/journal/minerals

Methods
Results
Conclusion
Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call