A Measurement Platform Scheme and Data Post-processing Method for Thermal Conductivity of Li4SiO4 Pebble Bed

Abstract

The effective thermal conductivity of tritium breeder pebble bed is an important thermal parameter and must be known for the thermo-mechanical design of solid tritium breeder blankets. In order to obtain the parameter, experimental measurement is an effective method. A measurement platform was designed by University of Science and Technology of China for CFETR solid blanket scheme to measure the immediate thermal conductivity data and study the effect of pebble bed temperature, the purge gas pressure and pebble deformation on the thermal conductivity of pebble bed. Measurements were performed based on about 1 mm diameter Li4SiO4 pebbles in the temperature range between 100 and 800 °C, with purge gas pressure ranging from 0.1 to 0.3 MPa. This paper described a measurement platform scheme by thermal probe method. On the other hand, for the sake of increasing the precision of thermal conductivity data transformed from temperature data, some improvements for the data post-processing using Monte Carlo inversion method were made in this paper too.