Abstract
This paper presents a method for determining the basic profile of a single-screw compressor including a gate rotor and a screw rotor. The inverse envelope concept for determining the cutting-edge curve of the gate rotor is presented. Based on this concept, the required cutter for machining the screw rotor can be obtained by an envelope of the one-parameter family of obtained screw rotors. The obtained screw rotor is an envelope of the family of gate rotor surfaces. Let the obtained envelope of the one-parameter family of gate rotor surfaces become the generating surface. The inverse envelope can be used to obtain the envelope of the family of generating surfaces. Then, the profile of the gate rotor with the cutting-edge curve can be easily obtained. The proposed method shows that the gate rotor and the screw rotor are engaged along the contact line at every instant. This is essential to reduce the effect of leakage on compressor performance. In this paper, a mathematical model of the meshing principle of the screw rotor with the gate rotor is established. As an example, the single-screw compressor for a compressor ratio of 11:6 is determined with the aid of the proposed mathematical model. Results from these mathematical models should have applications in the design of single-screw compressors.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.